Product Description OneUp Components Carbon E-Bar 35 mm Rise Handlebars - More comfort on long e-bike tours The OneUp Components E-Bar handlebars are made of carbon and feature a 35 mm rise, 8° backsweep and a 35 mm stem clamp. They help you achieve more comfort on the E-MTB due to the oval profile between the clamp area and the handlebar ends that measures only 20 mm at the narrowest point. This makes ithe Carbon E-Bar much more vertically compliant and vibration-damping than conventional carbon handlebars. This relieves strain on your arms and prevents premature fatigue. Arm pump is thus avoided, which is especially important on long tours such as with e-bikes. At the same time, you can always rely on the lateral stiffness and responsiveness of the handlebars. The Carbon E-bar also has openings and grooves for internal cable routing for Shimano STEPS e-bike computers or remote switches, which helps to tidy up the cockpit. Guidelines for Replacing E-bike Components:Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked E-bikes/pedelecs with pedal assistance. Specifications:Application:All Mountain, Cross Country, EnduroWidth:800 mmStem Clamp:35.0 mmRise:35 mmTechnical Information:Backsweep:8°Upsweep:5°Shortened Width (min.):750 mmMaterial:CarbonCompatibility:Shimano STEPS and other e-bike remote switchesplug diameter smaller than 6.5 mmmin. 650 mm cable lengthcable must be able to be unplugged from the remote switchstem compatible with the central cable opening on the handlebarsNote from the manufacturer:Cables from Specialized, Bosch or Rocky Mountain remote controllers cannot be routed internally through the Carbon E-Bar.The Orbea Rise has no handlebar-mounted display as it connects to the smartphone. It has an EW-EN100 junction box and a detachable EW-SD50 cable.If you cannot disconnect the cable from your Shimano remote shifter, you must buy a new Shimano switch with a detachable cable with a minimum cable length of 700 mm. You can also use the EW-JC200 2-port junction box and an EW-SD50 cable extension.Handlebar grips with an outer clamp are not compatible with the Carbon E-Bar.Bar ends are not compatible with the Carbon E-Bar.Features:20% more compliant in vertical direction than other carbon handlebarsoval profile between clamping area and handlebar ends20 mm diameter at the thinnest pointmore vibration damping, therefore more comfort and less arm fatigue on long toursarm pump is preventedlateral stiffness and load capacity for optimal steering control6.5 mm openings in the centre and at the handlebar ends for internal routing of Shimano STEPS and other remote control cablesgrooves for clean cable routing underneath the handlebarstested according to Zedler E-MTB Advanced Plus and international DH standardManufacturer Number:1C0702 Contents:1 x Weight: black | 800 mm: 238 g Manufacturer: OneUp Components Inc. Unit #1 1225 Industrial Rd West Kelowna BC V1Z 1G4 Canada support@oneupcomponents.com Distributor: bc GmbH Carlo-Schmid-Straße 12 52146 Würselen Germany info@bike-components.de