Voor 12:00 besteld, volgende werkdag verzonden

50.000+ producten beschikbaar

Specialist in fietsen, speelgoed & outdoor sinds 2010

Rohloff oem2 support bolt

Vendeuse Rohloff

EAN : 4250307402724

Prix ​​habituel €23,99
Prix ​​de vente €23,99 Prix ​​habituel
Vente Épuisé
Prix ​​unitaire
/par 
TVA incluse
Temporairement épuisé
Ce produit est disponible en pré-commande.
Expédition : €6,95 (NL) · Commandé avant 12h00, expédié le jour ouvrable suivant
14 jours droit de retour (consommateurs uniquement) · Informations de retour
Livraison estimée : 1-4 jours ouvrables
Paiement sécurisé iDEAL & Bancontact Garantie & service Spécialiste depuis 2010

Description du produit

Product Description IS mount, but no disc brake installed: the OEM2 Support Bolt by Rohloff The support bolt for OEM2 axle plate mounting consists of an M6 x 16 bolt with washer and self-locking nut. Mounting with OEM2 axle plate is only possible on frames with disc brake mount according to international standard (IS 1999/2000). If no disc brake is installed on the rear wheel, the Rohloff Speedbone/Monkey Bone can be dispensed with. Instead, a support bolt is screwed from the inside through the lower fastening eyelet of the disc brake (tightening torque: 8 Nm). When assembled in tandems, the Rohloff Speedbone/Monkey Bone is mandatory even without disc brake. For safe OEM2 assembly with the support bolt, the fastening eyelets on the brake cylinder mount must be made in one piece with the dropout, comply with the international standard (IS 1999) and the material thickness of the dropouts and fastening eyelets must not be less than 6 mm. A prerequisite for OEM2 mounting of the Rohloff Speedhub 500/14 with support bolt is the position of the mounting eyelets. If the rear fastening eyelet is located behind an imaginary vertical through the centre of the axle, OEM2 mounting with support bolt is permissible. If the rear fastening eyelet is positioned in front of an imaginary vertical through the centre of the axle, OEM2 mounting by means of a support bolt is not permitted. Caution:OEM2 mounting is only permitted on bicycle frames that have been approved for this by the frame manufacturer. Without the approval of the frame manufacturer, the use of this mounting variant is done at the user's own risk.Manufacturer Number:8560 Contents:1 x 1 x nuts1 x washers Manufacturer: Rohloff AG Mönchswiese 11 34233 Fuldatal Germany service@rohloff.de

Questions fréquentes

Quel est le délai de livraison pour ce produit ?+
Les commandes passées les jours ouvrables avant 12h00 sont expédiées le jour même. Le délai de livraison est de 1-4 jours ouvrables. Les frais d'expédition sont de €6,95 par commande (NL).
Quelles méthodes de paiement sont disponibles ?+
Vous pouvez payer avec iDEAL, Bancontact, carte de crédit (Visa, Mastercard, American Express, Maestro) et PayPal. Toutes les méthodes de paiement sont sécurisées et chiffrées.
Comment puis-je retourner une commande ?+
Vous disposez d'un délai de retour de 14 jours. Le produit doit être retourné dans son emballage d'origine et non endommagé. Les frais de retour sont à la charge de l'acheteur. En utilisant notre service de retour, les frais sont déduits du montant du remboursement. Remarque : le droit de rétractation s'applique uniquement aux consommateurs, pas aux commandes professionnelles.
Ce produit est-il expédié depuis les Pays-Bas ?+
Oui, toutes les commandes sont expédiées depuis Noordwijkerhout, Pays-Bas. Nous livrons aux Pays-Bas, en Belgique, en France et dans le reste de l'Europe.
Ce produit est-il garanti ?+
Tous les produits sont couverts par la garantie légale conformément au droit de la consommation néerlandais. En cas de défaut, contactez support@tormino.com.
Rohloff oem2 support bolt
€23,99